Advertisement


How can I improve a poor quality scan/photo of an ink signature on paper?


Question

I am trying to "transfer" my signature from paper to the computer. Here is the procedure I followed, yes you may laugh, I know it.

My question is, is it possible instead of the hard lines I got to have solid lines?

enter image description here

enter image description here

enter image description here

2013/05/26
1
2
5/26/2013 4:44:00 AM

This looks like a photo, so I'll treat is as one.

You are doing few things wrong here.

  1. You should've used plain white paper instead of one that has lines.

  2. You should've used proper/better lighting, perhaps a light directed right into the paper, but the more sunlight, the better it is.

It doesn't take more than common sense to know that less lines going across the signature, makes for easier/cleaner work.

and the bigger the contrast you can get between the background and the signature = better.

The only good thing you got going on in my opinion, Is the good thick lines and the fact that your lines are blue. It makes it tons easier.

This was what I did:

I used adjustment layers

enter image description here

1. I put Levels first ( Essentially the idea is to use this to make the contrast biggest between the lighter areas and the darker areas )

enter image description here

2. Then black & white ( Here the idea is to bring out the color of the object that we want to isolate, this being the signature.. ;) )

enter image description here

Also, not to forget, the good thing about adjustment layers is that you can keep adjusting things. ( Which translates to: "I did come back to levels after setting up the black & white to do some more accurate isolating of the signature" )

Here's the final results:

Original size.

enter image description here

Scaled size ( something that I think could possibly be the size this would be needed in. )

enter image description here


With the two tips at the top, you could get far better results

2012/06/15
5
6/15/2012 3:34:00 PM