How can I achieve metallic gold effect? I need to laser-print golden fonts using an OKI C9650 printer


My main difficulty is not laser-printing a large golden image, for example of a wedding ring. But I just can't get small fonts to have a metallic effect. The program I use is Corel Draw. I tried all sorts of metallic gold images and power-clipped to my fonts. The laser-printout shows shades of white, yellow and brown but doesn't look golden. I'm using "white Kraft paper" It's a heavy type of paper with one shiny side. I'd be grateful for any tips.

3/1/2012 4:47:00 PM

Akin to what Stan Rogers was referring to: if you are doing a small-run (of 1), with a design that isolates text, you can use a metal foil that is designed to adhere to laser toner. Basically, you place the foil on the already printed text and use an iron to heat it. This remelts the laser printer toner and causes the foil to stick to it. Some cases, you can attache the foil and then pass it through the laser printer as a blank page to use the toner fuser unit to remelt the toner.

Check out "Metallic Heat Transfer Foils". Make sure it is for home/design use, as opposed to offset printing or industrial use.

This ( ) is a random example which may be in line with what you are thinking about.

3/1/2012 10:44:00 PM

Licensed under: CC-BY-SA with attribution
Not affiliated with: Stack Overflow

Website under construction!!!