Advertisement


Create hatching in Inkscape?


Question

How can I create hatching in Inkscape? I want to create plain hatching like you would find in an engineering drawing. (I am not interested in "artistic" hatching like the "rough" hatching Inkscape has or other such effects.) So, for example, the drawing below shows hatching being used:

engineering drawing

2015/01/10
1
37
1/10/2015 1:00:00 AM

Accepted Answer

The hatching can be achieved by using pattern.Once you create a pattern,you can control the direction of hatching as required. Below are the steps to apply hatching to your drawing (I will apply this in a simple rectangle).

  1. Create a closed path for which hatching is required(I have used a simple rectangle)
  2. Now draw a line using pen tool and convert the line to pattern using Object-Pattern-Object to pattern. 1.png

  3. Once converted open the fill & stroke dialog box. Select the closed path for which you want to apply the pattern created. Click on the pattern option in the fill dialog. Select the new pattern you have created in the option which fills the selected area.2.png

  4. Now to adjust the direction of hatching you need to select the object (line- which you later converted to pattern) and click the node tool. Select the closed path(rectangle) with the node tool. You can see a X-shaped handle, a square handle & a round handle around the object. Dragging the X-shaped handle moves the pattern in any direction. Dragging the square handle scales the pattern. Dragging the round handle rotates the pattern. 3.png

Included a gif image(for step 4) gif image

2015/06/19
49
6/19/2015 4:43:00 PM